Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL TAB 8 NXTPAPER 5G
Factory Data Reset (Powered Off)

2026-10-15 04:42:11.394

TCL TAB 8 NXTPAPER 5G
Factory Data Reset (Powered Off)

Reset your TAB 8 NXTPAPER 5G to factory settings as a final troubleshooting step. Use this method if your device is unresponsive or you can't access the Settings menu.

Before you begin

If the device is responsive and can be powered on, the preferred reset method should be performed.
Perform a factory data reset only if necessary as it removes your Google™ account and all data including system data, app data and media.
For devices with Android™ Device Protection turned on, it's imperative Google sign-in credentials are known before completing a factory reset with the device powered off. If credentials are unknown, do one of the following:
If a pattern, PIN, etc. is or has ever been set up on the device, Google account sign-in is required during initial setup.

Steps

  1. With the device powered off, press and hold the
    Power / Side
     and
    Volume Up buttons
     on the right edge of the device until the Android Recovery screen displays.
    'Installing system update' may display, followed by 'No command'; continue to wait until the recovery screen appears.
  2. From the Android Recovery screen, select
    Wipe data/factory reset
    .
    Use the Volume buttons to cycle through available options and the Power / Side button to select.
  3. Select
    Factory data reset
    .
  4. Select
    Reboot system now
    .
Activate / Set Up Device