Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack 4G LTE Mobile Hotspot MiFi 4620L
Restore Settings to Factory Defaults

2026-10-15 12:10:25.842

Verizon Jetpack 4G LTE Mobile Hotspot MiFi 4620L
Restore Settings to Factory Defaults

If your Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 4620L powers off, crashes/resets, freezes or runs slow, view this info.

Before you begin

Restore Settings to Factory Defaults only if absolutely necessary as it removes all modified settings including Network Name (SSID), Wi-Fi / Admin Password, etc. and restores the default settings viewable on the external LED of the device.
After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.

Preferred Method

  1. Ensure the device is powered on.
  2. Remove the battery cover.
    Utilizing the provided slot, carefully lift then detach the cover.
    Remove battery cover
  3. Utilizing a paperclip (or similar tool), press and hold the reset button until MiFi® Resetting appears on the display, then release.
    Hold the button until the LED blinks one full blink and then a brief blink (5 seconds or less).
    Pin Reset
  4. Replace the battery cover.

Alternate Method

  2. From the System tab, click
    System Status
    .
  3. From the System tab, click
    Reset to Factory Defaults
    .
  4. Click
    OK
    .