Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack ® 4G LTE Mobile Hotspot MiFi ® 5510L - Wireless Network Security Settings

2026-10-03 12:51:03.496

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L - Wireless Network Security Settings

To view/change security settings (e.g., password) for your Verizon Jetpack - MiFi 5510L, see this info.
To view or change network security settings (e.g., Wi-Fi password, number of connected devices) for your Jetpack, see this info.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Wi-Fi tab, configure Wi-Fi settings as desired:
    Depending upon the selected security type, available options may vary.
    • Display Wi-Fi Name
      Enabled when the adjacent switch is set to ON.
    • Display Wi-Fi Password
      Enabled when the adjacent switch is set to ON.
    • Wi-Fi name
    • 802.11 Mode
      • 802.11b + 802.11g + 802.11n
      • 802.11g + 802.11n
      • 802.11b + 802.11g
      • 802.11n only
      • 802.11g only
      • 802.11b only
    • Security
      • None
      • WPA2 Personal/PSK
      • WPA/WPA2 Mixed Mode
    • Wi-Fi password
      If the Wi-Fi Password is changed, the network settings on the computer must updated. For assistance, select the appropriate operating system:
    • Maximum Wi-Fi connected devices (1-10)
      This option limits the number of devices connected to MiFi® 5510L.
    • Broadcast Wi-Fi name
      Enabled when a check mark is present.
    • Wi-Fi privacy separation
      Enabled when a check mark is present.
    • Wi-Fi Multimedia (WMM)
      Enabled when a check mark is present.
    • Channel (Automatic, 1-11)
    • Wi-Fi range
      • Short range - longer battery life
      • Long range - shorter battery life
  4. Click
    Save Changes
     (located in the lower-right).