Learn how to pair your tablet to a Bluetooth® device and connect to a Wi-Fi network on your Samsung Galaxy Tab S2 from Verizon.
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue. |
Setting Up Wi-Fi and Bluetooth® on Your Samsung Galaxy Tab S2
(Video Length- 1:46 )
samsung-tab-s2-wifi-and-bluetooth-video: Video Transcript
Setting Up Wi-Fi and Bluetooth® on Your Samsung Galaxy Tab S2 (1:46)
Set up your Wi-Fi and Bluetooth on your Samsung Galaxy Tab S2 from Verizon.
Open the Notification Panel by touching and sliding down from the top of the screen.
Tap the Settings icon in the upper right.
Then, tap Wi-Fi.
Make sure Wi-Fi is turned on by sliding the Wi-Fi switch to the right.
Wi-Fi will turn on and a list of nearby Wi-Fi networks will appear. Tap the one you want to connect to.
If you're connecting to a secure network, you'll need to enter its password.
Once done, tap Connect.
You should now see "Connected" underneath the network name.
Now let's look at connecting a Bluetooth® device to your tablet.
To set up Bluetooth, tap Bluetooth.
Make sure Bluetooth is turned on by sliding the Bluetooth switch to the right.
Tap Scan to get an updated list of nearby Bluetooth devices.
Please note that the device you are attempting to pair with must be in discovery mode or the scan will not find it.
Once you have found the device you want to pair with, select it.
You may need to confirm an already existing password for pairing. If this is the case, tap OK.
On the tablet, connected devices will appear in the paired devices list.
Press the Home button when you're done.
To quickly turn Wi-Fi or Bluetooth on or off, you can use the Notification Panel by touching and sliding your finger down from the top of the screen.
Then, tap the icon.
© 2023 Samsung Electronics America, Inc. Samsung and Galaxy S are trademarks of Samsung Electronics Co., Ltd.