The Outdoor Light Module provides wireless control of on/off functions for incandescent and fluorescent outdoor lighting.
The Outdoor Light Module allows you to turn connected landscaping and seasonal lights on/off anytime from anywhere, so you can control energy usage while still coming home to a well-lit house.
Outdoor Light Module
Set up and Install the Outdoor Light Module
Set up and activate the Outdoor Light Module Activate (pair) the Outdoor Light Module with the Gateway Device (not the Remote Control) before installing the Outdoor Light Module on your light fixture, as you can move your Outdoor Light Module close to the Gateway Device.
The Light Module is only recommended for use with incandescent and fluorescent bulbs 25 watts or higher in power.. If the wattage is lower, the dimmer feature may not work.
Do not expose to rain or place in damp locations.
Install at least three feet above ground level with the Outdoor Module pointed down.
Before you pair your Light Module with the Gateway Device and/or Remote Control, verify that your Outdoor Light Module is plugged into a working power outlet and the power light is solid green. The Light Module should be within 5 feet of the Remote Control and/or Gateway Device.
The pairing process in the Setup Wizard must be completed within 30 seconds otherwise you'll need to start over.