Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 03:06:51.099

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 6620L - Edit Access Point Name (APN)

Here's how to configure the APNs your Verizon Jetpack 4G LTE Mobile Hotspot - MiFi 6620L uses.
To define and configure the APNs your Jetpack can use, view this info.
An Access Point Name (APN) is used by your phone to determine how to connect to a public network like the Internet based on the type of data you are transmitting.
Although APN's can be manually changed, adjusting advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT admin prior to altering any of these settings.
LTE
Access Point Name (APN) Definitions
vzwims
Used for connections to IMS services. Required for TXT messaging.
vzwadmin
Used for administrative functions.
vzwinternet
Required for general Internet connections.
vzwapp
Required for PDA data service
vzwcf
Used for connections that must be routed through content filtering.
xx.vzwentp
Used for connections to mobile private networks.
'xx' is replaced by the enterprise MPN identifier.
xx.vzwstatic
Used for static IP connections.
'xx' is replaced by the appropriate static IP pool identifier.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (on the right).
    Ensure the Cellular Data switch is set to on On Off Switch.
  4. From the Networks tab, click
    Show Advanced Settings
    .
  5. From the 4G LTE APN field, edit the APN as required.
  6. Click
    Save Changes
     (at the bottom right).