LED Status Indicators - 4G LTE Network Extender for Enterprise
Here's how to interpret the LED status indicators on your 4G LTE Network Extender for Enterprise.
The 4G LTE Network Extender for Enterprise is an advanced business solution that's not available for consumer use.
Progress | Failure | LED State | Network Extender Status |
|---|---|---|---|
Red | Red | Solid | Hardware / Startup Initialization Hardware initialization and software execution stage. |
Orange | Red/Orange | Alternating | Ethernet Cable, Accquiring Local IP address Detection of the Ethernet cable and local IPv4 |
Orange | Red | 1 Blink | Acquired Local IP, DNS, VPN Setup DNS lookup and VPN establishment stage |
- | Red | 2 Blinks | Authentication Failure (cause code 4) Explicit FDR authentication failure condition |
Orange | Red | 3 Blinks | GPS Acquisition in Progress GPS acquisition stage |
Orange | Orange | 4 Blinks | Configuration Download Software download and parameter configuration stage |
Green | - | Fast Blinking | In Service System is in an operational condition |
- | Green/Red | Alternating | Post Operational issues/Alarms At least one alarm is active |
Normal progression of LEDs at start up (approximately 15 minutes)
- Hardware Initialization: LED is solid red.
- Acquiring IP address: LED is alternating red/orange.
- Local IP, DNS, VPN setup: LED is blinking orange one time.
- GPS acquisition: LED is blinking orange three times.
- In Service: LED is fast blinking green.