Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon 4G LTE Broadband Router
Activate / Set Up Device

2026-10-14 20:41:37.58

Verizon 4G LTE Broadband Router
Activate / Set Up Device

Setting up your Verizon LTE Broadband Router is quick and easy. Follow these simple steps to get your devices connected to the internet.

Before you begin

This router requires assembly.

Steps

  1. Install the 4G LTE SIM card with its gold contacts facing back up and the its cut-off corner facing downward.
  2. Install the antennas onto the threaded antenna posts.
    There two antennas that attach to the back of the router; both must be installed for 4G LTE service.
  3. Using the included stand, position your router upright.
  4. Plug your router power adapter cord into the power adapter input on the rear of the router and insert the other end into an electrical outlet.
  5. Press the
    Power On/Off button
    .
    hum mobile app get started
  6. From the device you want to connect to (smartphone, tablet, etc.), go to device settings or the software that manages wireless connections.
  7. Scan for new or available devices to connect to.
  8. Look for the name of your network.
    The network appears as "Verizon - MBR1515 - XXXX".
  9. Click on network name and enter the SSID and passphrase shown on the side of your router.
  10. Click
    Connect
    .