Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack ® MiFi ® 7730L - Advanced Settings

2026-10-01 05:29:43.584

Verizon Jetpack® MiFi® 7730L - Advanced Settings

Here's how to change advanced settings on your Verizon Jetpack MiFi 7730L.
To change the advanced settings (e.g., VPN Passthrough enable, Network Name broadcast enable, etc.) on your Jetpack, view this info.
Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.

Networks

For info regarding APN settings, refer to Edit Access Point Name (APN).
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    Networks
     (located below the Advanced tab).
  5. From the Preferred network technology field, click the
    dropdown menu
    .
  6. Click the appropriate setting:
    • Global
    • LTE/CDMA
    • LTE/GSM/UMTS
  7. Click
    Save Changes
     (located in the lower-right).

Manual DNS

Domain Name Server (DNS) settings are automatically assigned by the device. If turning on manual DNS is necessary, contact your local IT administrator for assistance.
  1. Access the Admin Web Interface.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    Manual DNS
     (located below the Advanced tab).
  5. Select
    Turn on Manual DNS
     to turn on or off.
    On when a check mark is present.
  6. From the DNS 1 IP address and DNS 2 IP address fields, enter the appropriate info.
  7. Click
    Save Changes
     (located in the lower-right).

Firewall

  1. Access the Admin Web Interface.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    Firewall
     (located below the Advanced tab).
  5. Tap the switch for any of the following to turn on or off:
    • VPN Passthrough
    • IPv6 Transparent Mode
  6. From the DMZ (IPv4) section, select
    DMZ
     to turn on or off.
    On when a check mark is present.
    If on, enter the appropriate IP address into the Destination IP address field.
  7. Click
    Save Changes
     (located in the lower-right).

LAN

  1. Access the Admin Web Interface.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    LAN
     (located below the Advanced tab).
  5. From the IPv4 section, enter the desired info into the following fields:
    • IP Address
    • Subnet Mask
    • MAC Address
    • Turn on DHCP server
      On when a check mark is present.
    • DHCP lease time
    • Start DHCP address range at
  6. From the IPv6 section, select
    Turn on IPv6
     to turn on or off.
    On when a check mark is present.
  7. Click
    Save Changes
     (located in the lower-right).