Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-14 21:27:59.421

Verizon Jetpack® MiFi® 7730L - LAN Settings

Here's how to configure advanced LAN settings for your Verizon Jetpack MiFi 7730L.
View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.
Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    LAN
     (located below the Advanced tab, to the right).
  5. From the IPv4 section, enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • MAC Address
    • Turn on DHCP server
      On when a check mark is present.
    • DHCP lease time
    • Start DHCP address range at
  6. Click
    Save Changes
     (located in the lower-right).