Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-14 16:02:57.854

Verizon Jetpack® MiFi® 7730L - Connect a USB Mass Storage Device

Here's how to connect a mass storage device via USB to your MiFi 7730L.
  • When a USB mass storage device is connected, folders and files can be shared with connected devices on the Jetpack's Wi-Fi network.
  • Only the USB type-C port can be used for sharing. The USB type-A port is available solely for charging a phone or other portable devices.
  • A USB type-A to USB type-C connector can be used to connect a USB-type A mass storage device.
    A connector isn't included with the Jetpack, but can be purchased via a 3rd party (non-Verizon) retail store.
  1. With the Jetpack powered on, connect a mass storage device to the Jetpack's USB type-C port located on the bottom edge.
    Allow several seconds for the Jetpack to recognize the storage device.
    Jetpack with a USB mass storage device
  2. From the Jetpack's display, tap
    Share
    .
  3. Review the message then tap
    OK
     to confirm.
To safely remove the storage device, navigate:
Menu
MiFi Share
Eject
Confirm
.