Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

ZTE Cymbal LTE - Insert or Remove SD / Memory Card

2026-10-13 19:09:30.066

ZTE Cymbal LTE - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your Cymbal LTE.
The ZTE Cymbal® LTE supports microSD memory cards which can be purchased from any Verizon store or online.
  1. Using the notch (lower-left edge, when the device is face down) gently lift and remove the battery cover.
  2. From the notch in the upper edge of the battery compartment, lift and remove the battery.
  3. Do one of the following:
    • Insert SD / memory card
      Ensure the gold contacts are facing down then insert the SD / memory card as shown unit it locks into place.
    • Remove SD / memory card
      Press the soft block down and slide the SD / memory card out.
  4. Align the battery cover then gently press to snap it into place.