Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

HP Envy X2 - Insert / Remove SIM Card

2026-10-13 18:54:25.968

HP Envy X2 - Insert / Remove SIM Card

Here's how to properly insert or remove a SIM card for your HP Envy X2.
Don't attempt to insert or remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.
  1. Ensure the device is powered off.
  2. Position the computer display side up.
    Utilize the card removal tool (or paperclip) to unlock the tray by inserting it into the provided slot (figure 1) then remove the tray (figure 2).
    Remove SIM card tray
  3. Do one of the following:
    • Insert SIM card
      Ensure the gold contacts are facing down and the notch is located in the upper-right as shown.
      Insert SIM card
    • Remove SIM card
      Once the tray is removed, lift the SIM card from the tray.
  4. Insert the SIM card tray.
    Press in on the tray to lock it into place (figure 4).