Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 06:10:03.927

Verizon Jetpack® MiFi® 8800L - LAN Settings

Here's how to configure advanced LAN settings for your MiFi 8800L.
View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.
Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT admin prior to altering any of these settings.
  2. Click
    Jetpack Settings
    .
  3. Click the
    Advanced tab
    , review the warning then click
    Continue
    .
  4. Click
    LAN
     (located below the Advanced tab).
  5. From the IPv4 section, enter the desired info into the following fields:
    • IP address
    • Subnet mask
    • MAC Address
    • Turn on DHCP server
      On when a check mark is present.
    • DHCP lease time
    • Start DHCP address range at
  6. From the IPv6 section, click
    Turn on IPv6
    to turn on or off.
    On when a check mark is present.
  7. Click
    Save Changes
    .