Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kazuna eTalk - Insert / Remove SIM Card

2026-10-04 15:06:32.615

Kazuna eTalk - Insert / Remove SIM Card

Here's how to properly insert or remove a SIM card for your eTalk.
Don't attempt to insert the SIM card while your Kazuna eTalk™ is powered on. Doing so may harm the SIM card and/or the device.
  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Insert your fingernail (or a similar tool) into the cutout located on the lower-left corner of the battery cover to lift and remove the cover.
  3. Use the fingertip cutout at the bottom of the battery compartment to lift the battery out then do one of the following:
    • Insert SIM card
      1. First open the slot for the SIM card by sliding it down and lifting, then position the SIM card with the gold contacts facing down.
      2. Once inserted, secure the SIM card by closing the slot and sliding it up to lock.
        Insert SIM card
    • Remove SIM Card
      1. Open the slot for the SIM card by sliding it down and lifting.
      2. Remove SIM card from the slot.
        Remove SIM card
  4. Insert the battery.
    Ensure the gold contacts line up then press down gently to secure.
  5. Attach the battery cover.
    Press down along the edges to lock into place.