Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Watch Active2 - Add / Remove a Wi-Fi Connection

2026-10-06 01:16:30.728

Samsung Galaxy Watch Active2 - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your Galaxy Watch Active2.
From your Android™ smartphone or Apple® iPhone® , ensure your Galaxy Watch Active2 software is up to date as the steps below apply to the most recent version.
  1. From the watch screen, press the
    Home button
    to open the apps screen.
    Press and hold the Power button
  2. Double-tap the
    Settings icon
    .
  3. Navigate:
    Connections
    Wi-Fi
    Wi-Fi Networks
    .
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the desired available Wi-Fi connection.
      2. Tap
        Password
        .
      3. Enter the Password (if required) then tap
        Done
        .
      4. Tap
        Connect
        .
    • Manually Connect to a Wi-Fi Network
      1. Swipe up then tap
        Add network
        .
      2. Tap
        Network name
         then enter the name of the desired network.
      3. Tap
        Done
        .
      4. Tap
        Security
         then select the security type (e.g., WEP, WPA/WPA2).
      5. Tap
        Password
        , enter the password then tap
        Done
        .
    • Remove a Wi-Fi Connection
      1. Tap the desired Wi-Fi connection.
      2. Tap
        Forget
        .