Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Manage Hotspot Settings - motorola edge+

2026-10-23 19:55:29.541

Manage Hotspot Settings - motorola edge+

Here's how to configure the hotspot settings (e.g., password, network name, timeout settings, managed devices etc.) on your motorola edge+.
  1. Open the
    Settings app
    .
  2. Navigate:
    Network & internet
    Mobile Hotspot &Tethering
    Mobile Hotspot
    .
  3. Tap the
    Use Wi-Fi hotspot switch
     to turn on.
  4. From the Mobile Hotspot screen, configure the following as needed:
    • Hotspot name (SSID)
    • Hide my device
    • Security (e.g., None, WPA3-Personal, WPA2/WPA3-Personal, etc.)
    • Hotspot password
      The new password must be entered on the connecting device.
      1. Tap the Password field to remove the existing password.
      2. Enter the password then tap
        OK
        .
  5. Tap
    Extend compatibility
     to turn on or off the use of the 2.4 GHz hotspot.
  6. Tap
    Manage devices
     to restrict which devices are allowed to connect.
  7. Tap
    Manage allowed devices
    .
  8. Tap
    Allow all devices
     to enable or disable.
  9. To add, tap
    Add allowed device
    :
    1. Enter the MAC address and device name then tap
      OK
      .
    2. Repeat steps 1 and 2 as necessary. When finished, tap the
      back arrow icon
       Back icon.
  10. Tap the
    Back icon
     Back icon.
  11. Tap
    Device limit
     then select an option (e.g., 1-10).
  12. Tap
    Timeout settings
     then select a preferred option (e.g., Never turn off, 5 mins, etc).
Check out these Mobile Hotspot FAQs for additional support.