Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 05:17:14.484

Verizon 5G Internet Gateway (LVSKIHP) - Establish Wired Connection

Here's how to create a wired Ethernet connection from a computer to the 5G Internet Gateway (LVSKIHP).
This content is for the 5G Internet Gateway (LVSKIHP). Refer to How to Identify Verizon 5G Home Equipment if you need to verify the model you're using.
  1. Plug one end of the Ethernet cable into an Ethernet port on the computer.
  2. Plug the other end of the Ethernet cable into the LAN port on the bottom of the 5G Internet Gateway.
    LAN Port
  3. If necessary, power on the device and computer.
  4. Ensure the LAN Port's LED is solid green.
    For assistance in locating the LAN Port, refer to Verizon 5G Internet Gateway - Locate Ports, Connectors and Buttons.
    If testing fails, try replacing your ethernet cable then attempt to test the connection again.