Fossil Gen 5 LTE Smartwatch - Factory Data Reset (Powered Off)
Here's how to factory / hard reset your Fossil Gen 5 LTE Smartwatch if the screen freezes or call, app, audio or sync issues occur and the device won’t start up.
Performing a factory data reset removes all data from the device. Only perform a reset if absolutely necessary.
Read these instructions in their entirety before attempting.
- Ensure your watch is powered off.An alternate reset method is available if the device can be powered on and is responsive.
- Press and hold theVolume DownandPower / Home button(right-edge) until the device vibrates and the 'FASTBOOT MODE' screen displays then release.
- From the FASTBOOT MODE 'Start' screen, press theVolume Up buttonrepeatedly until 'Recovery mode' appears.
- Press and hold thePower / Home buttonto select Recovery mode.
- When presented with an image of 'No Command' screen, do the following:
- Press and hold thePower / Home button.
- While holding the button, swipe up on the screen (may need to swipe 2 or more times) to access the 'Android Recovery' screen.
- From the 'Android Recovery' screen, selectWipe data / factory reset.Swipe up / down to move then swipe left/right to select.
- From the 'Wipe all user data?' screen, selectYes.Swipe up / down to move then swipe left/right to select.
- From the 'Android Recovery' screen, selectReboot system now.Swipe up / down to move then swipe left/right to select.Allow several minutes for the reboot process to complete.If applicable, set up your device.