Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraForce Ultra 5G UW - Insert or Remove SD / Memory Card

2026-10-02 14:41:28.886

Kyocera DuraForce Ultra 5G UW - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your DuraForce Ultra 5G UW.
The Kyocera DuraForce Ultra 5G UW supports microSD memory cards which can be purchased from any Verizon store or online.
  1. Ensure the device is powered off.
  2. From the lower right edge of the device (display facing up), remove the card tray.
    Insert your fingernail into slit on the SIM/microSD card tray cover and pull out the tray. (Example image below)
  3. Do one of the following:
    • Insert SD / memory card
      With the gold contacts facing down, insert the SD / memory card into the tray.
    • Remove SD / memory card
      From the bottom of the card, carefully lift to remove. To assist, use the opening on the opposite side of the tray to dislodge (using a fingernail or similar tool).
  4. Re-insert the card tray then press in to lock it into place.