Session status messages
Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

One Talk T41S/SW, T42S & T46S/SW IP Desk Phones
Create and Send a Text Message (SMS)

2026-10-04 19:38:59.958

One Talk T41S/SW, T42S & T46S/SW IP Desk Phones
Create and Send a Text Message (SMS)

Follow these instructions to send a text message from your One Talk T4xS series IP desk phone.

Before you begin

Text messaging is disabled by default and doesn't appear in the Message screen unless enabled, and can only be enabled on One Talk lines that don't have a smartphone as a primary device.
If two desk phones are configured on the same line, messages are delivered to only one of the desk phones. It's recommended to enable the text messaging feature on only one desk phone per line.
If a line is being shared by a desk phone and other endpoints (e.g., Mobile App, Desktop app), all endpoints receive incoming messages. However, messages sent from a desk phone won't appear as outgoing messages on the other endpoints.
Desk phones only support SMS; MMS isn't supported. If a picture / video message is sent to a desk phone line, any media in the message is removed and only the accompanying text displays.
Desk phones can store up to 50 text messages across all folders. When the phone reaches 50 messages, the user is notified that the mailbox is full and messages should be deleted. If the user does nothing, when a new message is received the oldest message is deleted automatically.
Maximum character count per message is 500 for T41S/SW and T42S, and 918 for T46S/SW models. Once the maximum character count is reached, any additional text is truncated.

Steps

  1. If necessary, enable text messaging:
    1. From the idle screen, navigate:
      Features
      SMS
      .
    2. Use the
      left and right arrow keys
      or the
      Switch soft key
      to select
      Enabled
      then press
      Save
      .
  2. From the idle screen, navigate:
    Menu
    Message
    Text Message
    .
  3. Select
    New Message
    .
  4. Enter the message text then press
    Send
    .
  5. Enter the destination address in the To field then press
    Send
    .