Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Arlo Go 2 LTE Security Camera - Insert or Remove SD / Memory Card

2026-10-10 18:07:46.009

Arlo Go 2 LTE Security Camera - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your Arlo Go 2 security camera.
  • The Arlo Go 2 Camera accepts SD, SDHC (UHS-I), or SDXC (UHS-I) micro SD cards, Speed Class 10, UH1 or U3, with capacity up to 2 TB.
  • Memory cards can be purchased from any Verizon store or online.
  2. Release the camera from the protective housing.
    Press the button on the magnetic charging port until a click is heard and the camera slides out partially.
    Housing release button
  3. Utilizing the notches on both sides, pull the camera to remove it from the housing.
    Slide the camera out of the housing
  4. Do one of the following:
    • Insert SD / memory card
      Insert the card as shown (gold contacts facing right).
      Insert SD Card
    • Remove SD / memory card
      Press the edge of the card until it ejects.
      remove SD Card
  5. Slide the camera back into the protective housing until it clicks.
    Insert camera