Session status messages
Session Status
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue.

Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wi-Fi Extender Mini
Activate / Set Up Device

Expand your home network coverage. Check out this guide to configure and connect your Wi-Fi Extender Mini.

Steps

Plug the Wi-Fi Extender Mini into a power outlet next to the Router.

When the light on the front is solid yellow, press the pair button on the Router and the Wi-Fi Extender Mini.

Both devices blink blue while pairing.

If there is an error during the pairing process, the Status LED slowly flashes red for two minutes after the error occurs.

Once you see a blinking yellow light, wait an additional 3 minutes then unplug the Wi-Fi Extender Mini.

Move it to an area between the Router and the weak Wi-Fi coverage then plug it in.

Once the LED indicator turns solid white, your setup is complete.