Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Inseego MiFi X PRO 5G UW - GPS over Wi-Fi

2026-10-12 17:08:51.62

Inseego MiFi X PRO 5G UW - GPS over Wi-Fi

If you need GPS on your Inseego MiFi X PRO 5G UW for use with computer apps, view this info.
  • The GPS over Wi-Fi setting allows your Inseego MiFi® X PRO 5G UW to provide a GPS (NMEA) stream to a Windows or Mac computer.
    This is only useful if running an app that is capable of utilizing a NMEA GPS stream (e.g., Microsoft Streets & Trips, etc.).
  • To utilize GPS over Wi-Fi, a driver must be installed on the computer.

Enable / Disable GPS Switch(es)

  2. From the Settings section, click the
    Navigation arrow
     Navigation arrow (lower-right) to open the Settings page.
  3. Click the
    GPS
     tab.
  4. Click the
    Enable GPS switch
     to turn on or off.
    If presented, review the GPS agreement and click
    Yes
     to continue.
  5. Click the
    Turn OFF GPS over Wi-FI switch
     to turn on or off.
  6. While the GPS over Wi-Fi (NMEA) switched is on, launch the GPS-enabled app on the computer then configure it to utilize a NMEA port or GPS receiver.
    Refer to the app's help menu or contact the app developer for assistance.
    Once the app has found the NMEA port / GPS receiver, it should report "Waiting for your location" or similar until a GPS fix is obtained. After that, it uses or displays the current GPS location.

Download GPS over Wi-Fi (NMEA) driver

  2. From the Settings section, click the
    Navigation arrow
     Navigation arrow (lower-right) to open the Settings page.
  3. Click the
    GPS
     tab.
  4. Click the
    Download Driver
     button.
  5. Locate the file in the downloads folder of your computer to complete the installation.