Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 09:52:59.8

Inseego MiFi X PRO 5G UW - Insert / Remove SIM Card

Here's how to properly insert or remove a SIM card for your Inseego MiFi X PRO 5G UW.
Don't attempt to insert or remove the SIM card with the battery still installed on your Inseego MiFi® X PRO 5G UW. Doing so can harm the SIM card and/or the device.
  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Place a fingernail in the notch on the top or bottom then lift the back cover.
    Remove cover
  3. Remove the battery then do one of the following:
    • Insert SIM card
      1. Lift the SIM access tab by placing a fingernail underneath the white arrow and lifting the tab up and to the right.
        Lift SIM access tab
      2. Slide the SIM card into the slot notch first, with the contact points facing down. Close the SIM access tab.
        Insert SIM
    • Remove SIM card
      1. Lift the SIM access tab by placing a fingernail underneath the white arrow and lifting the tab up and to the right.
        Lift SIM access tab
      2. Carefully slide the SIM card out of the SIM card slot.
        Remove SIM
  4. Re-insert the battery (begin with step 2).
  5. Replace the battery cover.