Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

moto g play - 2023
Check for Physical Damage

2026-10-02 11:27:17.817

moto g play - 2023
Check for Physical Damage

These examples help you identify physical or liquid damage that could affect the performance of your moto g play - 2023.

Before you begin

Prepaid service customers
: Visit a Verizon store to order warranty replacements. Orders for prepaid warranty issues can't be processed via Customer Service.
Standard service customers
: If you need to replace your device under warranty and the device has unreasonable wear and tear or any of the following, you could be assessed a damaged device fee.

Liquid or Corrosion Evidence

To identify if your device has water damage, check for:
  • corrosion, discoloration, or fuzzy growth on the charging, headset, SIM or memory ports.
  • Moisture under the display screen.
  • Liquid Detection Indicator (LDI) / Liquid Contact Indicator (LCI) is activated.
    The Liquid Damage Indicator (LDI) is located in the SIM card tray. Simply remove the tray to view the LDI (top of slot).
    Motorola uses a white field with pink or red X marks to indicate a device that has had no liquid contact. When the indicator comes in contact with liquid, the X marks become pink or red smudge marks across the white field.
    LDI

Damaged Ports

  1. View the following ports using a bright light and magnifier if possible:
    • USB / Charging: Examples of charging port damage include but are not limited to:
      • Port is loose or wiggles
      • Bent
      • Corrosion
    • SIM Tray

Display Issues or Damaged Buttons / Camera

  1. Examples of screen damage / button issues include but are not limited to:
    • Display
      : Examples of display issues include but are not limited to solid line(s) present across the screen, bleeding display, punctures, cracks or excessive scratches.
    • Separation
      : Examples of separation include but are not limited to lens or housing separating from device frame.
    • Missing physical buttons
      : Volume, Power / Side button missing or damaged.
    • Warping
      : Device or screen won't lay flat.
    • Pixel Deformities
      : Caused by physical impact to the screen or device.
    • Camera
      : Missing or cracked camera lens.

Hardware Modifications

  • A hardware modification is any physical change made to the device not performed by the manufacturer or an authorized agent of the manufacturer.
  • Most alterations of this type are cosmetic but involve opening the device case in a way that voids the manufacturer's original warranty and is considered physical damage.
  • Hardware modifications include, but are not limited to:
    • bezels or cases that involve opening the case and removing the original housing.
    • non-removable back case detached.
    • device screens replaced.
    • aftermarket decorations affixed permanently to the device.

Replacement Options

If damage is found, several replacement options may be available.