Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wi-Fi Extender (LVSKM1)
Set Up Device / Pair

2026-10-04 15:28:08.586

Wi-Fi Extender (LVSKM1)
Set Up Device / Pair

Expand your home network coverage effortlessly. Check out this guide to configure and connect your new Wi-Fi Extender LVSKM1.

Steps

  1. Plug the Wi-Fi Extender into a power outlet next to the Verizon Internet Gateway and wait for a solid yellow light.
  2. Press and hold the
    Multi-purpose Pairing button
     (pair button) on the Wi-Fi Extender LVSKM1 for 3 seconds, then the
    Pair button
     on the Verizon Internet Gateway (within 2 minutes).
    Both devices blink blue while pairing.
    If there is an error during the pairing process, the Status LED flashes red for 2 minutes after the error happens.
    Once a solid white light is seen on the Wi-Fi Extender LVSKM1, it’s paired.
    Press pair button
  3. Unplug the Wi-Fi extender from the power outlet, move it between the internet gateway and the weak Wi-Fi coverage area, then plug into a power outlet.
    If a blinking yellow and white light is seen, move the extender closer to the internet gateway.
  4. Once the LED indicator turns solid white, your setup is complete.
View LED Status Indicators