Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wi-Fi Extender (LVSKM1)
View LED Status Indicators

2026-10-03 02:19:43.601

Wi-Fi Extender (LVSKM1)
View LED Status Indicators

The LED lights on your Wi-Fi Extender LVSKM1 indicate its power or connection status. A quick glance shows whether it's working properly or needs attention.

Steps

  1. Locate the recessed circular LED light on top of the Wi-Fi Extender that surrounds the touchpad, then review the following chart:
    LED Status Indicators
    Function
    Status
    LED Pattern
    Paring (WPS/Bluetooth)
    Not paired to Router
    Animation Red/Amber
    Pairing mode
    Animation Blue
    Pairing successful
    Animation Blue
    Pairing fail
    Animation Red
    LTE coverage only/No Signal
    Solid Red
    Wi-Fi and Internet
    Wi-Fi is turned Off.
    Solid Amber
    Connected to router, no Internet
    Animation Red/Amber
    Connected to Internet
    Solid White (Turns off after 30 seconds)
    Other
    Firmware upgrade
    Fast Blink White
    Hard reset / Reboot
    Fast Blink White
    Turn ON device
    Animation White to Red/Blue
  2. If you observe a blinking yellow and white light, move the extender closer to the internet gateway. See Wi-Fi Extender LVSKM1 - Activate / Set Up Device for info on proper setup.