Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL 50 LE
Power Up in Safe Mode

2026-10-06 17:18:31.721

TCL 50 LE
Power Up in Safe Mode

Safe Mode is a diagnostic state on your TCL 50 LE that only runs system apps so you can isolate if a third-party app is causing freezing or slowness.

Before you begin

An alternate method is available if the device can be powered on and is responsive.

Steps

  1. With the device powered off, press and hold the
    Power button
     on the right edge of the device until the TCL logo appears then release.
  2. Approximately 2-3 seconds after the TCL logo appears on-screen, press and hold the
    Volume down button
    .
    If pressed too soon, device won't boot into Safe Mode.
  3. Continue to hold the
    Volume down button
     until Safe mode appears in the lower-left of the screen then release.
  5. To exit Safe Mode, restart the device.