Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Router
Activate / Set Up Device

2026-10-06 23:36:27.335

Verizon Router
Activate / Set Up Device

Enjoy a seamless home internet connection for streaming and working. Easily connect your computer or smartphone after you activate and set up your new Verizon Router.

Before you begin

Inside the Verizon Router box:
  • Setup guide
  • Verizon Router
  • Power adapter
  • Ethernet cable

Steps

  1. Remove the router from the box.
  2. Place the router on a stable surface near a window.
  3. Connect the router to the internet gateway by plugging the Ethernet cable into the WAN port.
  4. Connect the power adapter to the router and plug it into a power outlet.
    The router's blinking white light means it’s starting up. The light may fluctuate between red and white for up to 5 minutes; don’t unplug the router. Use the Verizon Home app for support.
  5. Check for a solid white light on the router.
    It can take up to 5 minutes to appear. Once the router shows a solid white, setup is complete.
  6. Connect your devices to your new Wi-Fi network.
    Use the Wi-Fi name and password printed on the back of the Gateway to connect your devices. Or scan the QR code printed there to connect automatically. You can edit your Wi-Fi name and password in the Verizon Home app.
  7. Open a web browser on the device connected to your Verizon Router network.
  8. In the browser address field (URL), enter: mynetworksettings.com, then press the
    Enter
    .
    Alternately, you can enter: https://192.168.1.1 into the URL field.
  9. Activate your router by opening a web browser on your computer and following the prompts.
View LED Status Indicators