Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wi-Fi Access Point
Activate / Set Up Device

2026-10-12 16:09:42.238

Wi-Fi Access Point
Activate / Set Up Device

Activate your Wi-Fi Access Point to get started. This ensures you can connect to the internet.

Before you begin

Inside the Box:
  • Wi-Fi Access Point
  • Power adapter
  • Ethernet cable 10 ft (3 meters)

Steps

  1. Remove the Wi-Fi Access Point from the box.
  2. Connect the Wi-Fi Access Point to the ONT (Optical Network Terminal) by plugging the Ethernet cable into the WAN port or wall plate leading to the WAN port outside the location.
  3. Connect the power adapter to the Wi-Fi Access Point and plug it into a power outlet and allow up to 5 minutes for set up to complete.
  4. Connect your devices to your new Wi-Fi network.
  5. Activate your Wi-Fi Access Point by opening a web browser on your computer and following the prompts.