Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack ® 4G LTE Mobile Hotspot MiFi ® 5510L - Restore Settings to Factory Defaults

2026-10-03 12:58:46.676

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L - Restore Settings to Factory Defaults

If your Verizon Jetpack - MiFi 5510L powers off, crashes / resets, freezes or runs slow, view this info.
Restore Settings to Factory Defaults only if absolutely necessary as it:
  • removes all modified settings including Network Name (SSID), Wi-Fi / Admin Password, etc.
  • restores the default settings viewable on the external LED of the device.
  1. Ensure the device is powered on.
  2. Remove the battery cover.
    Utilizing the provided slot, carefully lift then detach the cover.
    Remove battery cover
  3. Utilizing a paperclip (or similar tool), press and hold the reset button until "MiFi Resetting" appears on the display then release.
    Allow several minutes for the restore process to complete.
    Pin Reset
  4. Replace the battery cover.
    After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.
  6. From the left menu, click
    Jetpack Settings
    .
  7. From the Jetpack tab, click
    Backup and Restore
    .
  8. From the Restore to Factory Defaults section, click
    Restore Factory Defaults
    .
  9. Click
    Confirm
    .
    Allow several minutes for the restore process to complete.
    After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.
Alternatively, a restore can also be done as follows:
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Jetpack tab, click
    Backup and Restore
    .
  4. From the Restore to Factory Defaults section, click
    Restore Factory Defaults
    .
  5. Click
    Confirm
    .
    Allow several minutes for the restore process to complete.
    After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.