Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 19:11:42.846

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 5510L - LAN Settings

To configure advanced LAN settings for your Verizon Jetpack - MiFi 5510L, view this info.
View this info to configure advanced LAN settings (e.g., IP address, Subnet mask, DHCP address range, etc.) for your Jetpack.
Changing advanced settings may be harmful to the stability, performance, and security of the Jetpack. Contact your local IT administrator prior to altering any of these settings.
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Advanced tab, click
    Continue
     (located on the right).
  4. Click
    LAN
    .
  5. From the IPv4 section, enter the desired information into the following fields:
    • IP address
    • Subnet mask
    • Enable DHCP server
      Enabled when a check mark is present.
    • Start DHCP address range at
  6. Click
    Save Changes
     (located in the lower-right).