Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-14 20:31:01.511

Kyocera DuraForce PRO with Sapphire Shield - View Battery Info

Here's info on the battery specs (e.g., Use Time, Standby Time, etc.) for your DuraForce PRO.
Check out these tips for extending battery life.
Expand All
  • Up to approx. 24 hours Use Time
  • Up to approx. 15 days Standby Time
  • 3240 mAh Li-Ion non-removable battery
  • Battery life depends on the network, signal strength, temperature, features and accessories used.
  • It's common for batteries to be warm from use or charging.
  • Some heat is anticipated and perfectly normal, though the phone should not become too warm to handle comfortably.
  • The Kyocera DuraForce PRO - Explorer can get warm during charging. This is expected, especially if the device is being operated while it is charging. If the device gets warm during normal use, please see the tips above.
  1. Use the provided Kyocera wall charger then wait at least 1-2 mins to allow the device to charge.
  2. If the device does not seem to charge with the provided AC charger, connect the provided USB cable to a different AC charger (if available). If the device charges under this configuration, the provided AC charger needs to be replaced.