Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Ellipsis ® 7 - Common Camera Settings

2025-06-17 19:00:20.129
Here's info on common camera settings (e.g., flash, timer, etc.) for your Ellipsis 7 4G LTE tablet.
For additional camera settings, refer to page 25 of the Verizon Ellipsis 7 4G LTE User Guide.
Camera home menu
Expand All
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Camera icon
    Camera Icon
    .
  2. Tap the
    Switch Camera icon
     to switch between the back camera and front camera.
    Switch Camera Icon
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Camera icon
    Camera Icon
    .
  2. Tap the
    Shutter icon to take a picture.
    Shutter
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Camera icon
    Camera Icon
    .
  2. Tap the
    Camcorder icon
     to record a video.
    camcorder Icon
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Camera icon
    Camera Icon
    .
  2. Tap the
    Settings icon
     to change the camera settings.
    Settings icon
  3. Adjust any of the following:
    • Face Detection
       - Tap
      ON
       to display rectangles around the detected faces. Tap
      OFF
      (default) to disable.
    • Picture Size
      - Set the image resolution. Select the proper setting value: QVGA/VGA/1M pixels/1.3M pixels/2M pixels/3M pixels(default).
    • ISO
      - Adjust the camera sensor's sensitivity to light. Select the proper settings value: Auto (default)/100/200/400.
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Camera icon
    Camera Icon
    .
  2. Tap the
    Settings icon
     to change the camera settings.
    Settings icon
  3. Adjust the following:
    • Microphone
      • Tap
        ON
         (default) to record the video with voice.
      • Tap
        OFF
         to disable the function.
    • Time-lapse interval - This option determines the speed of your output video. Select the proper setting value (e.g., Off, 1, 1.5, 2, etc.).