Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 17:45:52.971

Activate / Set Up Device - Wireless Home Phone T2000

Here's how to set up your Wireless Home Phone T2000.
Electrical equipment can cause interference with Home Phone Connect. Avoid placing Home Phone Connect near other electrical equipment such as a refrigerator, television or microwave oven.
  • Wireless Home Phone T2000 comes with the SIM card installed.
  • Customers transferring in their home number can't make or receive calls on the Wireless Home Phone until the transfer process is completed. The transfer process can take 2 – 10 business days. Check the status of your transfer by visiting verizonwireless.com/port or by calling 877.567.4899.
  2. If needed, attach the antenna.
    Antenna sold separately and can be purchased from any Verizon Wireless retail store or at the online store.
    Wireless Home Phone T2000 works without it in a normal environment. You can choose to buy the external antenna if you're planning to put this device where signal might be weak, like in the basement.
    Install the optional antenna
  3. Connect the power adapter to the device then plug it into an AC power outlet.
    Attach the power
  4. Disconnect the home telephone from the wall jack.
    unplug the phone
  5. Connect the home telephone to the device.
    Don't plug the Home Phone Connect into the telephone wall jack.
    Connect the home phone
  6. Press the
    Power button
     (located at the back of the unit) to turn on the Wireless Home Phone.
    The power indicator turns blue when device is turned on.
  7. Place a call to start using the service.
    Ensure at least one of the signal strength indicator bars Signal bars is lit up. If no bars are lit, move the Wireless Home Phone to get a stronger signal.
    You may need to use the three-digit area code when dialing local and long distance numbers.