Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Watch - Factory Data Reset (Powered Off)

2026-10-13 03:06:25.037

Samsung Galaxy Watch - Factory Data Reset (Powered Off)

Here's how to factory / hard reset your Galaxy Watch if the screen freezes or call, app, audio or sync issues occur and the device won't start up.
Performing a factory data reset removes all data from the device. Mobile network settings are not reset. To remove the mobile network settings, reset network settings first. Only perform a reset if absolutely necessary.
  • If your device is responsive and can be powered on, the preferred reset method should be performed.
  • Read these instructions in their entirety before attempting.
  1. Ensure your watch is powered off.
  2. Press and hold the
    Power/Home button
     (right-edge) until 'Rebooting' appears at the bottom of the screen then release.
    Home button
  3. Press the
    Power/Home button
     repeatedly until the 'Select REBOOT MODE' screen appears.
    Select REBOOT MODE screen
  4. Select
    Recovery
    .
    Press the Power button to cycle through options.
  5. When 'Recovery' is highlighted as seen in the image above, press and hold the
    Power/Home button
     until the device reboots again.
    Allow several minutes for the reboot process to complete.
    If applicable, set up your device.