ZTE Blade Vantage 2 - Add / Remove a Wi-Fi Network
Here's how to connect to a Wi-Fi network or remove a saved connection on your Blade Vantage 2.
- Open theSettings appon your ZTE Blade™ Vantage 2.
- Navigate:.
- Ensure the 'Use Wi-Fi' switch is turned on.
- From the Wi-Fi networks section, perform one of the following:
- Connect to an available Wi-Fi network:
- Tap the preferred Wi-Fi network.
- If presented, enter the appropriate password then tapCONNECT.To view the password as it is being entered, tapShow password.
- Manually connect to a Wi-Fi network:
- TapAdd network.
- From the Network name (SSID) field, enter the appropriate name.
- From the Security field, tap theDropdown menu
.
- Tap the appropriate security option (e.g., Enhanced Open, WEP, etc.).
- From the Password field, enter the appropriate password.
- Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tapSAVE.
- Remove a Wi-Fi connection:
- TapSaved networks.
- Tap the Wi-Fi network you wish to remove.
- TapFORGET.