Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Router
Restore Settings to Factory Defaults

2026-10-15 05:56:50.052

Verizon Router
Restore Settings to Factory Defaults

Easliy learn to restore your Verizon Router to factory settings if it crashes, resets, freezes or runs slowly.

Before you begin

A reset to factory default deletes all changes made to the configuration and connected clients (e.g., Network Name (SSID), Wi-Fi/Admin Password, etc.) need to reconnect.

External

  1. From the back of the router, locate the Reset pin hole.
  2. Insert a paper clip then press and hold the
    Reset button
     for at least 10 seconds with the router powered on.
    If a backup was done prior to the reset, perform a restore if desired.
    Reset pin hole

Admin WebGUI

  1. Sign in to the Admin WebGUI.
    You must be connected to the 5G Internet Gateway to access the admin page.
  2. From the Router Home screen, click
    Advanced
    .
  3. From the left menu, navigate:
    Utilities
    Save & Restore
    .
  4. From the Save & Restore section, click
    Factory Default
     then
    Restore configuration
    .
    If a backup was done prior to the reset, you can restore your router settings.

Manually Connect to Wi-Fi