Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-06-02 04:42:06.115

GPS over Wi-Fi - Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 4620L

If you need GPS on your Verizon Jetpack - MIFi 4620L for use with computer apps, view this info.
  • The GPS over Wi-Fi setting allows the MiFi device to provide a GPS (NMEA) stream to a Windows or Mac computer.
    • This is only useful if running an app that is capable of utilizing a NMEA GPS stream (e.g., Microsoft Streets & Trips, etc.).
  • To utilize GPS over Wi-Fi, a driver must be installed on the computer.
  1. From the Advanced tab, click
    Settings
    .
  2. From the Router section, select
    GPS over Wi-Fi (NMEA)
    .
    Enabled when a check mark is present.
    If presented, review the agreement then click
    Ok
    to continue.
  3. Click
    Save
    .
  4. If GPS over Wi-Fi (NMEA) is enabled, launch the GPS-enabled app on the computer then configure it to utilize a NMEA port or GPS receiver.
    Refer to the app's help menu or contact the app developer for assistance.
    Once the app has found the NMEA port / GPS receiver, it should report "Waiting for your location" or similar until a GPS fix is obtained. After that, it uses or displays the current GPS location.

Download GPS over Wi-Fi (NMEA) driver

  1. From the Advanced tab, click
    Settings
    .
  2. From the Router and GPS over Wi-Fi (NMEA) sections, click
    How to use this feature
    .
  3. From the Driver Installation section, click
    USB and GPS Driver for Windows
    then follow the step-by-step instructions to complete installation.