Verizon Support
Verizon SignIn Alerts

High Speed Internet

 Resetting your Actiontec GT704WGB gateway to the factory defaults
  1. With the power on (Power LED on front panel should be lit green), use the pointed end of a paper clip to press and hold the Reset button for 30 seconds.

  2. Reset button

  3. Release the Reset button. The Actiontec GT704WGB gateway should reboot itself.

  4. Wait 15 seconds before resuming setup.

  5. Your Actiontec GT704WGB gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. If you have a home network, you must re-configure your Actiontec GT704WGB gateway to match the previous settings that were assigned to all the other devices on your wireless network. Otherwise, no other network devices will be recognized.

Privacy SettingsAccept CookiesAccept Cookies Actiontec GT704WGBReset button SolutionDesc1=45196
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps


Watch Fios