Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

5G MiFi M1000 - Insert / Remove SIM Card

Was this helpful?

Here's how to properly insert or remove a SIM card for your 5G MiFi M1000.

Don't attempt to insert or remove the SIM card with the battery still installed on your 5G MiFi® M1000. Doing so can harm the SIM card and/or the device.

Ensure the device is powered off.

Remove the Jetpack's back cover by placing a fingernail in the notch on the top or bottom then lift the back cover.

Remove the battery then do one of the following:

Insert SIM card

Ensure the gold contacts are facing down then slide in the card until it won't go further and is securely under the metal SIM holder.

Remove SIM card

Press down on the SIM tab and slide the SIM card out.

Re-insert the battery (begin with step 2).

Put the back cover on by pressing down along the edges until it snaps into place.

Layer_4 Created with Sketch.

5G MiFi M1000 - Insert / Remove SIM Card