Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 07:11:07.618

One Talk Mobile App - Activate / Set Up Call-Through

Here's how to configure your One Talk mobile app to use the Call-Through feature.
The Call-Through feature allows a user's One Talk phone number to use their phone's native dialer for improved call quality.
Users can set up Call-Through within the One Talk app using one of two methods:
Expand All
Depending on whether or not Call-Through has been set up on this device before, some of the following steps may not display.
  1. During initial installation of the One Talk app, review the info on calling options then tap
    Next
    .
    Calling options screen
  2. At the 'Option 1' screen, review the explanation of App Calling then tap
    Next
    .
    Screen explaining App Calling feature
  3. At the 'Option 2' screen, review the explanation of Call-Through then tap
    Next
    .
    Screen explaining Call-Through feature
  4. When prompted to select an option, tap
    Call-Through
    .
    Screen where user selects the preferred calling option
  5. Review the screens explaining how Call-Through works then tap
    Next
    .
    Tutorial screens explaining how Call-Through functions
  6. Enter your 10-digit mobile number then tap
    Validate
    .
    This should reflect the number of the phone on which you're setting up Call-Through.
    Screen showing area to enter mobile number
  7. Tap
    Done
    .
    Setup finished screen with Done button
  1. From the One Talk app, tap the
    Menu icon
     Icon with three horizontal lines (upper-left).
  2. Tap the
    Calling mode switch
     (center of the screen) to switch between App Calling and Call-Through.
    One Talk options menu
  3. If prompted, review the screens explaining how Call-Through works then tap
    Next
    .
    Tutorial screens explaining how Call-Through functions
  4. Enter your 10-digit mobile number then tap
    Validate
    .
    This should reflect the number of the phone on which you're setting up Call-Through.
    The phone number is pre-populated if Call-Through has been set up before.
    Screen showing area to enter mobile number
  5. Tap
    Done
    .
    Setup finished screen with Done button