Here's how to route and manage cables for the Verizon Receiver (LV65).
Indoor Cable Management
- To manage the cables, remove the cable ties and cable clips from the box then tapContinue.Watch this video for a demo.
- Using the cable clips secure the cable to the wall or window then tapContinue.Watch this video for a demo.
Outdoor Cable Management
You must use an indoor power outlet. The cable adapter and power adapter are for indoor-use only.
- From the 'Managing cables' screen tapGet Started.
- To manage the cables, remove the cable ties and cable clips from the box, as well as the cable adapter and extra Ethernet cable if needed then tapContinue.Watch this video for a demo.
- Unplug the Ethernet cable and route it inside through an open window, leaving some slack in the cable outside then tapContinue.Watch this video for a demo.
- Connect the Ethernet cable to the Receiver’s power adapter, using the extra Ethernet cable to reach it, if needed then tapContinue.Watch this video for a demo.
- Use the cable clips to secure the cable to the outdoor wall beneath the window and the Receiver then tapContinue.If you have excess cable, wind it into a loop, bind it with a provided cable tie and hang it to a cable clip.The cable must hang beneath the Receiver and the window so that rainwater drips away from them.Watch this video for a demo.
- Ensure the cable hangs below the window and the Receiver then tapContinue.
- Use the additional cable clips to secure the cable, to the interior wall then tapContinue.Watch this video for a demo.
