Verizon Support
Customers With Disabilities
Verizon SignIn Alerts

High Speed Internet

D-Link 2750B Wireless DSL Gateway: Changing your password
  • If you didn't change your gateway's default password when you set up your router, it may have been changed to your gateway router's serial number to provide greater security.

    You can find your router's serial number on a label affixed to the bottom or back of your gateway.

  • If you can't remember your gateway user name or password, you must reset your default settings and reconfigure your network.
Dlink2750B Graphic
D-Link 2750B Gateway

More Help:
Restore Factory Settings
Port Forwarding
Create Wireless Network

Note: The D-Link 2750B Gateway security screens and prompts may vary slightly from these directions depending on when you purchased your gateway and the firmware loaded on it.

To change your D-Link 2750B Gateway password:
  1. Open your Web browser and enter in the Address field
  2. Click the Settings tab.
  3. Enter your user name and password and click Continue. Your default user name is admin if you didn't change it when you configured your network.
  4. Click the System tab.
  5. From the sub-menu, click Users.
  6. Under the Full Name heading, click Administrator. The Administrator information is displayed.
  7. Enter a new password in the New Password field.
  8. Enter your new password again in the Retype New Password field to confirm that you entered it correctly
  9. Click OK. A warning page opens.
  10. Click OK to save your changed user name and password. Note: You may be asked to log in using the new password.
Privacy SettingsAccept CookiesAccept Cookies
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Services
  • Suspend My Service
  • Manage Services
  • Apps


Watch Fios