Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 20:00:10.393

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 6620L - Sign in to the Admin Page

Here's how to navigate to the admin page for your Verizon Jetpack - MiFi 6620L.
This helps navigate to the admin page or if you've forgotten the admin password for your device.
  • Ensure you have an active connection (wired or wireless) between the MiFi and the device with which you're attempting to access the admin page.
  • If the Wi-Fi connection has been previously disabled through the admin page, you may not be able to enable it after a Factory Reset is completed. This may require a wired connection via the USB cable.
  1. Establish a Wi-Fi network connection with a device (e.g., computer, smartphone, tablet, etc.).
    Wi-Fi name and password can be obtained via the external LED or the sticker on the back of the MiFi.
    If connecting to a computer, select the appropriate operating system for assistance:
  2. From the device that's connected to the Jetpack, open a web page then enter
    http://my.jetpack
     into the URL address field.
    Alternatively, enter 192.168.1.1 into the URL address field.
    If the admin page does not appear, refer to step 1.
  3. Click
    Sign In
     (at the top-right).
  4. Enter the admin password then click
    Sign In
    .
    The admin password can be obtained via the external LED of the device.