Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 11:49:37.114

Orbic JOY 2 - Activate / Set Up Device

These steps guide you through setting up and customizing your JOY 2 for everyday use.
If you need to transfer contacts and media from one device to another, follow these step-by-step instructions before activating your new device.
To activate the device on prepaid service, refer to Set up Verizon Prepaid Service.
  1. Ensure a 5G SIM card is inserted before powering on your Orbic® JOY 2.
    To avoid potential activation / service issues, don't insert a 4G SIM card.
    5G devices purchased from Verizon include a pre-installed 5G SIM card.
  2. If powered off, press and hold the
    Power button
     on the right side of the device until it vibrates and Orbic appears then release.
  3. From the 'Hi there' screen, select the appropriate language then tap
    Start
    .
  4. From the 'Phone Activation' screen, tap
    Next
    .
    If prompted, enter the account PIN then follow the on-screen prompts (see Account PIN FAQs for more info).
    If activating a new phone, ensure the old phone is powered off.
  5. From the 'Set Up Wi-Fi' screen, select a network, enter the password then tap
    Next
    .
    Tap
    Skip
     to add a Wi-Fi network after setup is complete.
  6. From the 'Copy apps & data' screen, tap
    Next
     to continue.
    Tap
    Don't copy
     to skip this step.
  7. From the 'Google Sign in' screen, sign in to your Google™ account then tap
    Next
     or create a new one.
    Signing in to Google allows you to access Gmail™ and your Google apps.
  8. Review the Google Terms of Service, Google Play Terms of Service, and Google Privacy Policy then tap
    I agree
    .
  9. From the 'Google services' screen, select the desired options to turn on or off then tap
    Accept
    .
  10. From the 'Set a PIN' screen, enter a PIN code then tap
    Next
    .
    Tap
    Skip
     to enable a screen lock after setup is complete.
    Tap
    Screen lock options
     to lock your device using a pattern or password.
  11. From the 'Verizon Services' screen, select the desired services to turn on or off then tap
    Accept
    .
  12. From the 'Verizon Cloud' screen, review the options then tap
    Accept
    .
    Tap
    Skip
     to set up Verizon Cloud after setup is complete.