Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

FiOS Internet



 Entering the WPA encryption settings for your Verizon MI424WR network
  1. Click Advanced Security Settings in the left navigation panel. [Show Me]


  2. Select WPA in the Level 1 section to enable WPA network encryption.


  3. WPA

  4. Confirm that Pre-Shared Key is selected in the Authentication Method field. [Show Me]


  5. Select the format (ASCII or Hex) from the dropdown list that you used when entering your WPA encryption key when setting up your other computers and wireless network adapters. [Show Me]


  6. Enter the WPA encryption key you entered when configuring the other computers and network adapters on your network.


  7. WPA Encryption Key


  8. Confirm that AES is selected in the Encryption Algorithm field. [Show Me]


  9. Select Group Key Update Interval if you enabled automatic encryption key generation at timed intervals when you set up the other computers and network adapters on your network. [Show Me]


  10. If you enabled Group Key Update Interval in the previous step, enter the number of seconds before a new WPA encryption code is automatically created. You must enter the same interval used when setting up the other computers and network adapters on your network. [Show Me]


  11. Click Apply to save your WPA settings.




Privacy SettingsAccept CookiesAccept Cookies WPAPreshared KeyEncryption FormatWPA Encryption KeyAESGroup Key IntervalInterval in Seconds
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Services
  • Suspend My Service
  • Manage Services
  • Apps

Support

Watch Fios