Verizon Support
Customers With Disabilities
Verizon SignIn Alerts

High Speed Internet

Fujitsu Speedport modem installation
  1. Plug the small, round end of the power supply into the power jack in the back of the modem, and then plug the power supply into an electrical outlet. [Show Me]

  2. Connect one end of the phone cord to the Line jack in the back of the Fujitsu modem. [Show Me]

    Note: If you previously connected to the Internet using a dial-up connection, unplug the phone cord from your analog modem (usually located in the back of your computer), then plug that cord into your modem.

  3. Connect the other end of the phone cord directly into a phone jack or the 2-for-1 adapter.

    Note: Make sure you do not connect the modem to a filter.


  4. Plug the Ethernet cable into the Data jack in the back of the Fujitsu modem. [Show Me]

  5. Plug the other end of the Ethernet cable into the Ethernet jack in your computer (use the jack that looks like a large telephone jack). If you can't find the Ethernet jack, you may not have a Network Interface Card (NIC) installed. Check to see if you have a NIC installed in your computer.

    Note: Network Interface Cards are not provided by Verizon Online.

  6. Wait for the Power and Modem lights to turn steady green (this takes a few seconds):

Need help? Try troubleshooting the Fujitsu modem lights.

Privacy SettingsAccept CookiesAccept Cookies SolutionDesc3=18211;;SolutionDesc2=17416,18084
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps


Watch Fios