Verizon Support
Customers With Disabilities
Verizon SignIn Alerts

High Speed Internet

Step 4: Configuring your network
Link to Step 1 Link to Step 2 Link to Step 3 Link to Step 4 Link to Step 5 Link to Step 6
Creating an Actiontec GT704WGB wireless network in Windows Vista

The Vista Set up a wireless router or access point wizard will do most of the work to configure your Actiontec GT704WGB wireless network. The wizard will open your Actiontec GT704WGB configuration utility so you can enter two critical pieces of information, and then it will do the rest.

The first critical piece of information is a name for your network. This is called your network's SSID (Service Set Identifier) and can be any combination of numbers and letters that you choose, as long as it doesn't exceed 32 characaters. All devices connected to your network must use the same SSID.

The second piece of critical information is a network encryption key. The encryption key helps to keep your network data secure by encrypting the data before it is sent wirelessly between computers on your network. You must use the same type of encryption (WEP, WPA2 or WPA) and enter the same encryption key for all devices connected to your network.

To configure your wireless network:
  1. Click Start in the left Taskbar.

  2. Select Control Panel. [Show Me]

  3. Click Network and Internet in Control Panel. [Show Me]

  4. Click Network and Sharing Center. [Show Me]

  5. Click Set up a connection or network in the left navigation panel.

  6. Set up a connection or network

Privacy SettingsAccept CookiesAccept Cookies SolutionDesc1=42748,42749,42750,42755,42756,42757;SolutionDesc3=xxxxx
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Services
  • Suspend My Service
  • Manage Services


Watch Fios